Searching for 10/285 truck wheels for an American truck application? The 10/285 specification is a common 10-stud wheel configuration, but PCD is only one part of identifying the correct replacement wheel.
A 10/285 truck wheel has 10 mounting holes positioned on a 285 mm Pitch Circle Diameter (PCD). However, wheels sharing this PCD can still differ in width, offset, centre bore, material, finish and intended axle application.
Mesh Wheels and Accessories’ range includes 10/285 22.5-inch truck wheels in several sizes, with steel and alloy options for different applications.
This guide explains 10/285 wheel fitment and the main specifications to check before choosing a replacement.
What Does 10/285 Mean on a Truck Wheel?
The 10/285 specification describes the wheel's mounting-hole arrangement:
- 10 = number of mounting holes
- 285 = 285 mm Pitch Circle Diameter (PCD)
PCD is the diameter of the imaginary circle passing through the centres of the mounting holes.
This means a 10/285 wheel is different from another 10-stud configuration such as 10/335, even though both have the same number of mounting holes.
The full wheel specification must be checked before purchasing a replacement.
What Trucks Use 10/285 Wheels?
Within the Mesh range, 10/285 PCD truck wheels are commonly associated with American truck applications.
However, identifying a replacement wheel based only on the truck's manufacturer is not recommended.
Wheel specifications can vary between models, axles and vehicle configurations. Trucks may also have undergone modifications during their working life.
The existing wheel and hub specifications should therefore be confirmed before ordering.
What Sizes Are Available in 10/285 Truck Wheels?
Mesh Wheels and Accessories carries 10/285 truck wheels across several 22.5-inch sizes, including:
- 8.25 × 22.5
- 9.00 × 22.5
- 11.75 × 22.5
The correct width depends on the wheel, tyre and intended application.
A 22.5-inch diameter alone does not establish compatibility. Two 22.5-inch wheels can have different widths, offsets, PCDs and mounting specifications.
8.25 × 22.5 10/285 Truck Wheels
The 8.25 × 22.5 10/285 truck wheel is one of the configurations available within the Mesh range.
The size designation indicates:
8.25 = nominal wheel width in inches
22.5 = nominal wheel diameter in inches
10/285 = 10 mounting holes on a 285 mm PCD
Depending on the required application, Mesh offers 8.25 × 22.5 wheels across different materials and finishes.
When replacing an existing wheel, match the complete specification rather than selecting a wheel solely because it is labelled 8.25 × 22.5.
9.00 × 22.5 10/285 Truck Wheels
Mesh also offers 9.00 × 22.5 10/285 truck wheels, including options intended for steer applications.
The additional width and wheel specifications need to suit the intended tyre and vehicle configuration.
Offset is particularly important when comparing steer-wheel options because it affects the position of the wheel relative to the hub and surrounding components.
Do not substitute a different width or offset without confirming that it is suitable for the application.
11.75 × 22.5 10/285 Truck Wheels
The Mesh range also includes wider 11.75 × 22.5 10/285 truck wheels.
These wheels have different dimensional and application requirements from narrower 8.25 or 9.00-inch options.
If replacing an 11.75 × 22.5 wheel, confirm the PCD, offset, centre bore, mounting specifications and intended application before ordering.
Matching the diameter and width alone is not enough to establish correct fitment.
Steel 10/285 Truck Wheels
Mesh offers steel truck wheels in 10/285 configurations across selected sizes.
Depending on the wheel specification, finishes within the range include:
- Silver
- White
- Chrome
Steel wheels are widely used across commercial truck and trailer applications.
The required material and finish should be considered after confirming the dimensional and mounting specifications of the wheel.
Alloy 10/285 Truck Wheels
The Mesh range also includes 10/285 alloy truck wheels.
Depending on size and specification, available finishes include:
- Machined alloy
- Polished alloy
- Polished inside
- Polished both sides
- Full chrome alloy
Finish does not determine fitment. A polished or chrome wheel still needs to match the vehicle's required dimensions, PCD, offset, centre bore and application.
10/285 vs 10/335 Truck Wheels
One of the most important distinctions when identifying a 10-stud truck wheel is whether it uses a 285 mm or 335 mm PCD.
| Feature | 10/285 | 10/335 |
|---|---|---|
| Mounting holes | 10 | 10 |
| PCD | 285 mm | 335 mm |
| Common association | American applications | European/Japanese applications |
| Directly interchangeable | No | No |
Both wheels may look similar from a distance, but their mounting holes are positioned differently.
Never assume that a wheel will fit simply because both options are 10-stud.
What Else Should You Check Before Buying a 10/285 Wheel?
PCD is an important starting point, but it does not provide the complete wheel specification.
Before purchasing a 10/285 replacement truck wheel, check:
Wheel Diameter
Confirm the required diameter, such as 22.5 inches.
Wheel Width
Identify whether the application requires an 8.25, 9.00, 11.75-inch or another specified width.
Offset
Wheel offset affects how the wheel sits relative to the mounting surface. The specified offset must suit the intended application.
Centre Bore
The wheel's centre bore must be compatible with the relevant hub and mounting arrangement.
Stud-Hole Specification
Do not assume all 10/285 wheels have otherwise identical mounting details.
Load Rating
The wheel must have an appropriate rated capacity for the intended vehicle and application.
Axle Application
Confirm whether the wheel is intended for a steer, drive or trailer position.
How Do I Identify an Existing 10/285 Truck Wheel?
Start by looking for manufacturer markings, part numbers and size information on the existing wheel.
Useful information can include:
- Wheel size
- PCD
- Offset
- Centre bore
- Part number
- Material
- Load rating
- Manufacturer markings
If the wheel cannot be positively identified from its markings, have the wheel and hub specifications checked before ordering a replacement.
Do not rely solely on visual comparison.
Common Mistakes When Buying 10/285 Truck Wheels
Avoid these assumptions when choosing a replacement:
- Every American truck uses 10/285 wheels.
- Every 10-stud wheel uses a 285 mm PCD.
- Every 22.5-inch wheel is interchangeable.
- Matching the PCD alone confirms fitment.
- All 10/285 wheels have the same offset.
- Steer, drive and trailer wheels can always be interchanged.
- A similar-looking wheel has the same specification.
The safest approach is to identify the complete wheel specification before comparing replacement options.
Frequently Asked Questions
What does 10/285 mean on a truck wheel?
10/285 means the wheel has 10 mounting holes positioned on a 285 mm Pitch Circle Diameter (PCD).
Is 10/285 an American truck wheel pattern?
10/285 is commonly associated with American truck applications within the Mesh range. Always confirm the actual vehicle and hub specification before ordering.
Is 10/285 the same as 10/335?
No. Both have 10 mounting holes, but 10/285 uses a 285 mm PCD while 10/335 uses a 335 mm PCD.
What sizes does Mesh offer in 10/285 truck wheels?
The Mesh range includes 10/285 options across 8.25 × 22.5, 9.00 × 22.5 and 11.75 × 22.5 configurations. Availability varies by material, finish and application.
Does Mesh sell alloy 10/285 truck wheels?
Yes. Mesh’s range includes alloy 10/285 truck wheels across selected sizes and finishes. Confirm the required specification and current availability before ordering.
Does Mesh sell steel 10/285 truck wheels?
Yes. Mesh offers selected 10/285 steel truck wheels, including different finish options depending on size and specification.
Explore 10/285 Truck Wheels at Mesh
If you are replacing an existing 10/285 truck wheel, start by confirming the complete wheel specification rather than PCD alone.
Mesh Wheels and Accessories offers 22.5-inch 10/285 truck wheels across multiple widths, materials, finishes and applications.
Browse our truck wheel range or request a wheel quote from Mesh Wheels and Accessories.
